Supported network interfaces
ATM (T1, E1, T3, E3, OC3, OC12)
Multichannel T3, E3, T1, and E1
Digital Voice
Dynamic Packet Transport OC12/STM4
Packet Over SONET (OC-3)
Gigabit Ethernet
Fast Ethernet (100Base-T and MII)
Ethernet 10Base-T, AUI, and 10Base-FL
IBM channel
Token Ring
FDDI (dedicated)
HSSI
ISDN PRI
Synchronous serial
Routers per chassis
1
Power supplies
Interface processor slots
4
Route Switch Processor slots
PCMCIA Flash memory card (optional, 2 slots available)
16 MB default, 20 MB option
Processor type
MIPS RISC
High-speed backplane
5-slot, 1 1.067-gigabits per second (Gbps) CyBus: 4 interface processor slots, and 1 RSP slot
Power dissipation, max. configuration
600W with AC-input
600W with DC-input
Heat dissipation
715W (2440 BTUs/hr)
Power distribution
75A max. at +5 VDC
15A max. at +12 VDC
3A max. at -12 VDC
5A max. at +24 VDC
AC-input rating
100 to 240 VAC wide input with PFC
9A max. at 100 VAC, 4A max. at 240 VAC (at 600W)
AC-input cable
DC-input rating
-40 VDC min. in North America (-56 VDC in E.C.)
-48 VDC nominal in North America (-60 VDC in E.C.)
-52 VDC max. in North America (-72 VDC in E.C.)
20A max. at -48 VDC, a nd 16A max. at -60 VDC
DC-input cable
10 AWG; recommended min. wire gauge (customer provided)
DC-input hold-up time
10 milliseconds (ms) of output after the DC input has been interrupted
Frequency
50-60 Hz
Airflow
Side-to-side through the chassis using a variable-speed, 6-fan array
Temperature
32 to 104°F (0 to 40°C), operating; -4 to 149°F (-20 to 65°C), storage
Humidity (noncondensing)
10 to 90%
Dimensions (H x W x D)
10.5 x 17.5 x 17.0 in. (26.67 x 44.45 x 43.18 cm)
Chassis depth including power cord and cable management brackets is 19 in. (48.26 cm)
Weight
Chassis and power supply and fan array only: 46 lb (20.87 kg)
Chassis fully configured with 1 RSP2 and 4 interface processors: 70 lb (31.75 kg)
Agency approvals
Safety: UL 1950, CSA 22.2-No. 950, EN60950, EN41003, AUSTEL TS001, AS/NZS 3260, IEC 801-2, 3, 4, 5, and 6
EMI: FCC Class A, VCCI Class II, and CISPR 22 B (EN 55022) Conducted Emissions